
Cudy GS1010PE 8 Port Gigabit PoE+ Switch with 2 Uplink Ports
৳5,950
In Stock
Key features
- Model: GS1010PE
- 8 x Gigabit PoE+ ports + 2 x Gigabit uplink ports (10 RJ45 in total)
- 120W total PoE budget, up to 30W on a single port (IEEE 802.3af/at)
- DIP switch for Default, VLAN and Extend modes
- Extend mode: up to 250 m at 10 Mbps on ports 7-8, with PoE watchdog
- 20 Gbps switching capacity, store-and-forward
- Metal case with built-in power supply
1
Specification
Controls & LEDs
| Mode Switch | VLAN / Default / Extend DIP switch |
| LED Indicators | Power; Link/Act for each port |
General
| Model | GS1010PE |
| Type | Unmanaged Gigabit PoE+ switch |
| Casing | Metal |
| Installation | Desktop; rack mount with brackets (brackets not included) |
Others
| Certifications | FCC, CE, RoHS |
| Package Contents | GS1010PE, power cord, installation guide |
Performance
| Switching Capacity | 20 Gbps |
| Forwarding Rate | 14.88 Mpps |
| MAC Address Table | 2K (2048) |
| Packet Buffer | 2 Mbit |
| Transmission Method | Store-and-Forward |
| Standards | IEEE 802.3i, 802.3u, 802.3ab, 802.3x, 802.3af, 802.3at |
| Ethernet Functions | Full/half duplex, auto-negotiation, Auto MDI/MDIX |
Physical
| Dimensions | 220 x 163 x 40 mm |
| Weight | 785 g |
| Operating Temperature | 0~40°C |
| Storage Temperature | -40~70°C |
| Humidity | Operating 10~90%, storage 10~95% non-condensing |
| MTBF | >200,000 hours |
PoE
| Total PoE Budget | 120W |
| Max PoE per Port | 30W |
| PoE Output Voltage | DC 48-55V |
| PoE Power Pins | 1/2(+), 3/6(-) |
| PoE Watchdog | Enabled in Extend mode; reboots plugged-in clients that stop responding |
Ports
| RJ45 Ports | 10 x 10/100/1000 Mbps |
| PoE Ports | Ports 1-8 (IEEE 802.3af/at PoE+) |
| Uplink Ports | Ports 9-10 (data only) |
| Extend Mode Ports | Ports 7-8 |
| Shielded RJ45 Ports | Yes |
| Cable Distance | Up to 100 m (Cat5e for Gigabit); up to 250 m at 10 Mbps on ports 7-8 in Extend mode |
Power
| Power Input | 100-240V~ 50/60Hz (AC inlet, internal power supply) |
| Power Supply | 120W |
| Max Power (excluding PoE) | 10W |
Description
The Cudy GS1010PE is an unmanaged desktop switch with ten Gigabit RJ45 ports. Ports 1 to 8 supply IEEE 802.3af/at PoE+ power, up to 30W on any single port within a 120W total budget, so IP cameras, access points and VoIP phones can run from the same cable that carries their data. Ports 9 and 10 are data-only uplinks for a router, NVR or another switch.
A DIP switch selects one of three modes: Default, VLAN (which isolates ports 1 to 8 from each other) and Extend, which lets ports 7 and 8 reach up to 250 m at 10 Mbps and turns on a PoE watchdog that restarts unresponsive devices. The power supply is built in, the housing is metal, and the switch can sit on a desk or go into a rack with optional brackets.
Questions (0)
Have questions about this product? Get specific details from our tech experts.
There are no questions asked about this product yet.
Reviews (0)
Authentic feedback from verified customers who purchased this product.
This product has no customer reviews yet.

Cudy GS1010PE 8 Port Gigabit PoE+ Switch with 2 Uplink Ports
৳5,950




